RaspAnd Nougat 7.1.2 for Raspberry Pi 3 – Build 171220/171215 – with Google Play Store, Kodi 17.6, Aptoide TV, Bluetooth and TeamViewer working very well

NEWS 171220: RaspAnd 7.1.2 Build 171220 can be used with the official Raspberry Pi 7 inch touchscreen and Big TV Screens
Thanks to a member on this site who asked for support for the Raspberry Pi official 7 inch touchscreen I started to experiment with different configurations. Success! The changes are so good that I’ve decided to uploaded a new version of RaspAnd today. I’ve also included the app Quick Reboot Pro (so you don’t have to use the power switch).

Build 171220 of RaspAnd can be downloaded by those who have purchased Build 171215 (and previous versions of RaspAnd 7.1.2).

NEWS 171220/171215 ABOUT RaspAnd Nougat 7.1.2 with Google Play Store (and everything else!) working
RaspAnd Nougat 7.1.2 Build 171220/171215 has GAPPS installed and Google Play Store working. Bluetooth works and you can use TeamViewer to control other computers from your Rpi3. RaspAnd can be installed in Windows using Win32 Disk Imager or Etcher. The video performance is generally much better than in previous versions. Your Wifi connection is stable and it will reconnect after every reboot of your Rpi3.

Slideshow – showing RaspAnd’s boot procedure…

Download RaspAnd Build 171220/171215…

MORE NEWS 171220/171215 ABOUT RaspAnd Nougat 7.1.2
RaspAnd Nougat 7.1.2 with GAPPS can be installed to a Micro SD card (preferable a class 10 card) in Windows 10 using Win32 Disk Imager or Etcher. You can alternatively (of course) use the dd-command in a Linux system. Unzip the downloaded file raspand-nougat-7.1.2-lineage-gapps-aptoide-tv-kodi-664mb-171220.zip. Then open a terminal and run the command dd if=raspand-nougat-7.1.2-lineage-gapps-aptoide-tv-kodi-4300mb-171220.img of=/dev/sdX bs=1M
(Change X to b, d or…).

What’s the point with Win32 Disk Imager or Etcher?
Well, until recently you had to have some basic knowledge about Linux to be able to install RaspAnd 7.1.2. Now you don’t need any special knowledge at all! (Just some basic computer knowledge). When you use Etcher it will look like this.

Using GParted to increase the data partition
As I said above RaspAnd Nougat 7.1.2 Build 171220/171215 can be installed in Windows using Win32 Disk Imager or Etcher. This method has one disadvantage. Only about about 3GB can be used as data storage no matter which card you use. Now say, for example, that you use Micro SD card (preferable a class 10 card) of 32GB about 26GB will be “wasted”. You can, however, change that with the help of GParted. See below how to do it.

How to get rid of the 3GB limit after Win32 Disk Imager or Etcher has been used:
– write the image with Win32 Disk Imager or Etcher
– start up Ubuntu or another Linux system – you can also use a Linux Live CD/USB stick
– start GParted – screenshot before resizing
– resize the DATA partition – screenshot after resizing
– done!

MORE ABOUT RaspAnd
RaspAnd Nougat 7.1.2 Build 171220/171215 is an Android 7.1.2 Nougat system which can run on Raspberry Pi 3. I have included the following apps:
1) GAPPS (Google Play Services with Google Play Store)
2) Kodi 17.6 (latest version which allows users to play and view most videos, music, podcasts, and other digital media files from local and network storage media and the Internet. YouTube is enabled and working very well!)
3) Spotify TV 1.6.3 (working very very well)
4) Google Play Games (needed for Clash of Clans to run)
5) Clash of Clans 9.256.19 – very popular!
6) TeamViewer 1.3.0.7991 – control other computers from your Rpi3!
7) Jelly Browser 7.1.2 – use it to watch YouTube etc.
8) Aptoide TV 3.2.5 (for installing new apps which can’t be found on Google Play Store – many many apps can be installed!)
9) ES File Explorer 4.1.6.7.5 working very well
10) Chess 2.3.6
11) AIDA64 1.47
12) Termux – a very special terminal. (Use the APT package manager!)
13) Quick Reboot Pro 1.6.1 (in Build 171220)

ABOUT Android 7.1.2
Version 7.1.2 is the second latest Android system by now. Released on April 8, 2017. The system is used in very few mobile phones (as far as I know).

What is Raspberry Pi?

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

RASPBERRY_PI_2-small
Raspberry Pi 3 model B made in February 2016. It has a 1.2GHz 64-bit quad-core ARMv8 CPU and 1GB RAM. Read more…

About running RaspAnd 7.1.2 Build 171220/171215 on Raspberry Pi 2
You can run RaspAnd 7.1.2 also on a Raspberry Pi 2 computer, but the system will be awfully slow. The Raspberry Pi 3 is much faster. Overview of the differences…

My sources
My work/build is the outcome of the Community Open Source Project and The LineageOS project.

ABOUT KODI
Kodi (an award-winning free and open source (GPL) software media center for playing videos, music, pictures, games, and more) works very well in RaspAnd. You can enable a lot of Addons. Most important is that the YouTube Addon is enabled by default and that it works very well. I.e. both the sound and the video performance when running YouTube in Kodi is satisfying. Here’s a link to the best Kodi addons! You can also read a more informative article about Kodi in general.

Kernel
Kernel 4.4.104-exton-v7+ is used in RaspAnd Nougat Build 171220/171215.

Wifi support
The new versions of RaspAnd has support for Wifi (on Raspberry Pi 3). RaspAnd 7.1.2 runs very well on the new Raspberry Pi 3 computer. Previous problems with the Wifi connection are gone in RaspAnd Build 171220/171215. I.e. the Wifi connection will automatically be re-established after every reboot. Thanks to Lineage and Google.

How do I install RaspAnd in Linux

Use the dd-command. Unzip the downloaded file raspand-nougat-7.1.2-lineage-gapps-aptoide-tv-kodi-664mb-171220.zip. Then open a terminal and run the command dd if=raspand-nougat-7.1.2-lineage-gapps-aptoide-tv-kodi-4300mb-171220.img of=/dev/sdX bs=1M
(Change X to b, d or…).

Win32 Disk Imager
– RaspAnd 7.1.2 Build 171220/171215

RaspAnd 7.1.2 version 171220/171215 can be installed in Windows Win32 Disk Imager or Etcher – see above.

Different Micro SD Cards
For best performance you should use SD Cards of good quality. I can recommend Samsung MicroSD Pro Plus 32GB Class 10. Write speed up to 95 MB/s. Also Samsung MicroSD EVO 16GB Class 10. Write speed up to 48 MB/s. Price 47 $ respectively 10 $ (in Sweden).

Different boot parameters in boot/config.txt
As you can see there is a file called config.txt in the folder boot. Check out this overview explaining the different parameters in config.txt. Some changes to config.txt could (possibly) help if you have screen problems (which I don’t think you will have when running RaspAnd Nougat Build 171220).

Startup of RaspAnd Nougat
The first thing you will see on the screen is the Lineage Boot Animation. If you do not see this green ring moving you haven’t installed RaspAnd correctly on the SD card. Try again and do EXACTLY as I write above. After about five minutes (the first time you startup RaspAnd) you will see the Welcome first screen. Watch a Slideshow – showing RaspAnd’s boot procedure and what you should do after you’ve seen the first screen. NOTE: When you see the first screen, you’ll have a chance to copy everything from your Android mobile phone to Rpi3/RaspAnd. I.e. choose the alternative Copy your data instead of Set up as new. If you do that you must be very patient. The whole process will take some time and you should also reboot your Rpi3 a couple of times. Be aware of the fact that installing/running many apps in RaspAnd will slow down the system considerably. You can, however, uninstall apps which you don’t need or apps which doesn’t run in RaspAnd. Watch a screenshot of RaspAnd’s Desktop when I have copied everything from my mobile phone to RaspAnd.

Navigation in RaspAnd Nougat
Normally you use the Esc key to get back or end an app running. To end some apps you may have to use the Ctrl Alt F1 or F2 keys simultaneously. Note 1: You’ll also have a Back and Home key. Note 2: You can also install the Quick Reboot Pro app (so you can reboot and power off your Rpi3 without using the power switch – screenshot). Go to Settings/Developer options and enable Root access. To be able to do that you’ll have to enable Developer options first. Go to Settings/About table and click on “Build number” about six times. Note: Quick Reboot Pro is pre-installed in Build 171220.

Change the system language
You can change the default English language to your preferred language. Just open Settings and go to Languages & input. See an example below, when I’m changing to French.
1. Choose your language
2. I’ve changed to French
3. The keyboard changes automatically to French layout
4. Everything in Settings (and everywhere else) will be in French
5. Also Google Play Store!

Bluetooth and TeamViewer

Bluetooth works in RaspAnd Build 171220/171215. As an alternative you can use the TeamViewer app, which is pre-installed. Screenshot when the TeamViewer app is running on my Rpi3 and controlling my PC.

Video & TV cast
You can use your Rpi3 with RaspAnd Build 171220/171215 for Video & TV cast. You can find a lot of apps to download for this purpose – screenshot 1, screenshot 2. You can test download them via Google Play Store and keep the one which suits you and your TV. I used an app called PlayTo Samsung TV – screenshot.

Clash of Clans and other popular games
Clash of Clans 9.256.19 (a very popular epic strategy game) works very very well. Perfect video quality and audio. Many other games will run. Install and test them!

Spotify
Spotify works very well in RaspAnd Nougat. Just log in and play your favorite music!

NOTE/WARNING – 1
Running Android Nougat on a Raspberry Pi 3 can sometimes be perceived as a bit sluggish. If you find it so, I recommend that you restart the system a couple of times, then everything will run faster! I.e. not really superfast, but faster.

SCREENSHOTS
Slideshow – showing RaspAnd’s boot procedure
Screenshot 2 – RaspAnd’s Desktop
Screenshot 3 – Google Play Store running
Screenshot 4 – Spotify running
Screenshot 5 – YouTube running in Jelly Browser with perfect video quality
Screenshot 6 – Aptoide TV running
Screenshot 7 – TeamViewer running and controlling my PC
Screenshot 8 – Kodi running
Screenshot 9 – Rpi3 connected to mobile phone by Bluetooth
Screenshot 10 – Developer options
Screenshot 11 – The Desktop when the Raspberry Pi official 7″ touchscreen is used (RaspAnd Build 171220)
Screenshot 12 – Running YouTube in the Jelly Browser when the touchscreen is used (RaspAnd Build 171220)
Screenshot 13 – The Desktop when a Samsung 55″ TV is used as monitor (RaspAnd Build 171220)

KNOWN ISSUES re. RaspAnd Build 171220/171215
1. The screen can flicker sometimes on certain monitors when running Kodi 17.6. (The flickering is minimal though).
2. You can’t use the YouTube app. You will have perfect sound, but no video. Watch YouTube videos in Kodi 17.6 instead. The very best alternative is to use the Jelly Browser. Perfect video quality (if you don’t use the whole screen).
3. Not all apps will run in RaspAnd Nougat. You can for example run the popular (?) Clash of Clans very well, but not Angry Birds. Many many apps will run without problems though.
4. You can’t run Netflix.

NOTE/WARNING – 2
PLEASE NOTE that you must be aware of the fact that the Raspberry Pi 3 computer has its limitations and that Android 7.1.2 is a very advanced Linux system. Having said that I must also say that the apps I have included in this Build (see above) work very well. Most important changes in Build 171215: Your Wifi connection will be stable and Bluetooth works for the very first time in my RaspAnd 7.1.2 builds. NOTE also: Build 171220/171215 is (almost) perfect in every aspect considering that the Rpi3 computer has its limitations. Running RaspAnd Build 171220 you can use the Raspberry Pi official 7 inch touchscreen and very Big TV screens.

DOWNLOAD
This build of RaspAnd has been replaced by Build 180529…

Android is a trademark of Google Inc.
Raspberry Pi is a trademark of Raspberry Pi Foundation

This entry was posted in Android, Exton Linux, Linux, RaspAnd and tagged , , , , , , , , , , , , , , , , , , , , . Bookmark the permalink.

71 Responses to RaspAnd Nougat 7.1.2 for Raspberry Pi 3 – Build 171220/171215 – with Google Play Store, Kodi 17.6, Aptoide TV, Bluetooth and TeamViewer working very well

  1. Pingback: Raspberry Pi three OS RaspAnd Now Ships with TeamViewer 13, In accordance with Android Nougat | Today Torrents

  2. Pingback: Android TV on Raspberry pi - FLASH-JET -

Leave a Reply to exton Cancel reply

Your email address will not be published. Required fields are marked *

Solve : *
32 ⁄ 8 =